Product Description
- Cisco® Catalyst® 2960-X Series Switches are fixed-configuration. stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1).
- Designed for operational simplicity to lower total cost of ownership. they enable scalable. secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS® Software
- .
- Product HighlightsCisco Catalyst 2960-X switches feature:- 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance
- Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks
- FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional)
- Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget- 24-port PoE fanless switch for deployment outside the wiring closet
- Reduced power consumption and advanced energy management
- USB and Ethernet management interfaces for simplified operations
- Application visibility and capacity planning with integrated NetFlow-Lite
- LAN Base or LAN Lite Cisco IOS® software
- Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacementCisco Catalyst 2960-XR models also offer:
- Power resiliency with optional dual field-replaceable power supplies
- IP Lite Cisco IOS® software with dynamic routing and Layer 3
- Switch Models and ConfigurationsCatalyst 2960-X switches include a single fixed power supply and are available with either the Cisco IOS LAN Base or LAN Lite feature set.
- Catalyst 2960-XR switch models include a field-replaceable modular power supply and can accommodate a second power supply.
- Catalyst 2960-XR is available only with the Cisco IOS IP Lite feature set.
- Catalyst 2960-X series Software
- All Catalyst 2960-X Series Switches use a single Universal Cisco IOS Software Image for all SKUs.
- Depending on the switch model. the Cisco IOS image automatically configures the LAN Lite.
- LAN Base. or IP Lite feature set.
- LAN Lite models have reduced functionality and scalability for small deployments with basic requirements.
- Cisco Catalyst 2960-X Family of Switches are available with the LAN Base and LAN Lite feature sets and Catalyst 2960-XR Family of switches are available IP Lite feature sets.
- Note that each switch model is tied to a specific feature level; LAN Lite cannot be upgraded to LAN Base and LAN Base cannot be upgraded to IP Lite.
- Cisco Catalyst 2960-XR IP-Lite High-Performance RoutingThe Cisco hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 2960-XR IP-Lite Switches:
- IP unicast routing protocols (Static.
- Routing Information Protocol Version 1 [RIPv1].
- RIPv2.
- RIPng. and EIGRP-Stub) are supported for network routing applications.
- Advanced IP unicast routing protocols (OSPF for Routed Access) are supported for load balancing and constructing scalable LANs.
- IPv6 routing (OSPFv3) is supported in hardware for maximum performance.
- EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite.
- Equal-cost routing facilitates Layer 3 load balancing and redundancy across the stack.
- Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing protocol configured (for both IPv4 and IPv6).
- Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) provides dynamic load balancing and failover for routed links.
- Protocol Independent Multicast (PIM) for IP multicast is supported. including PIM sparse mode (PIM-SM).
- PIM dense mode (PIM-DM).
- PIM sparse-dense mode and Source Specific Multicast (SSM).
- Network SecurityThe Cisco Catalyst 2960-X Series Switches provide a range of security
- to limit access to the network and mitigate threats. including:
- MAC-based VLAN assignment enables different users to authenticate on different VLANs.
- This feature enables each user to have a different data VLAN on the same interface.
- Cisco TrustSec uses SXP to simplify security and policy enforcement throughout the network.
- For more information about Cisco TrustSec security solutions. visit cisco.com/go/TrustSec.
- Comprehensive 802.1X
- to control access to the network. including Flexible Authentication. 802.1x Monitor Mode. and RADIUS Change of Authorization.
- IPv6 First-Hop Security enhances Layer-2 and Layer-3 network access from proliferating IPv6 devices especially BYOD devices.
- It protects against rogue router advertisements. address spoofing. fake DHCP replies and other risks introduced by IPv6 technology.
- Device Sensor and Device Classifier enable seamless versatile device profiles including BYOD devices.
- They also enable Cisco Identity Services Engine (ISE) to provision identity based security policies.
- This feature is available on both the 2960-X and the 2960-XR product families.
- Cisco Trust Anchor Technology enables easy distribution of a single universal image for all models of Catalyst 2960-X by verifying the authenticity of IOS
Specifications
| Brand Id | 3190 |
|---|---|
| Specifications | Cisco Catalyst WS-C2960X-48FPS-L Managed L2/L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black |
| Language | en_GB |
| Delivery Time | Standard delivery in 3 working days |
| Delivery Cost | £0.00 |
| Warranty | 1 year |
| Condition | new |
| Keywords | Cisco Catalyst WS-C2960X-48FPS-L Managed L2/L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black |
Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more