Product Description
- HDD/SSD duplicator
- Interface: USB 3.2 Gen 2 (3.1 Gen 2).
- Housing material: Acrylonitrile butadiene styrene (ABS). 43.9 x 108 x 24.1 mm.
- Black.
- MAIWO K10635N type C 10Gbps to dual bay HDD/NVMe M2 SSD clone converter for 2.5 and 3.5 SATA.
- Key
- .
- Screw-less design easy to install HDD and SSD.
- Compatible for different kinds of HDD/SSD in the market, including M-key NVMe SSD,2.5 SATA HDD/SSD and 3.5 SATA HDD, can recognize two disks simultaneously when connecting with PC.
- Support M-key NVMe SSD.
- Offline clone, dual way, can copy 2.5/3.5 SATA => NVMe or NVMe => 2.5/3.5 SATA, switch to control source and target disk.
- Four LED lights indicate clone progress 25%,50%,75% and 100%
- Interface: Type C to SATA/M-key M2.
- Support SSD size: 2230,2242,2260 ,2280.
- USB speed to 10Gbps max.
- Support U.
- A.
- S.
- P, will improve speed 30% at win8 or above.
- Compatible with windows, MAC and Linux.
- Unit size:108 x 35 x 24 mm.
- Clear Indicator Light.
- Drive Indicatior.
- Light Flashes when read & write, light goes off when in sleep mode..
- Clone Indicator.
- Light flashes when cloning, light up when cloning is finished..
- Step 1.
- Insert 2.5/3.5 SATA drive into the SATA Port, or insert M.2 NVMe SSD into the M2 port..
- Step 2.
- Spin the silicone cork to fix the M.2 hard drive..
- Step 3.
- Connect the adapter to your device via data cable..
- Step 4.
- Connect the power adapter and open the power switch..
- Clone Operation Steps.
- Step 1.
- Choose the clone mode.
- Make sure the capacity of the target drive is larger than or equal to the source drive.
- Connect the power adapter, open the POWER switch, the power light, lights up and then the two Drive Indicators light up.
- Step 2.
- Long-press Clone button for 5 seconds and the Clone Indicator flashes.
- Press Clone button within 5 seconds to enter clone mode.
- Corresponding progress indicators start to flash when cloning.
- Indicators are on once cloning is finished
- Note:.
- You must remove the USB-C cable from the PC for the cloning process to work.
- Box Contents.
- Package Content:. 1 x adapter. 1 x cable. 1 x power adapter. 3 x screws. 1 x manual. 1 x warranty card.
- Warranty. 1 Year.
- .
- LED indicators.
- Yes.
- Transfer rate. 10000 MB/s.
- Interface.
- USB 3.2 Gen 2 (3.1 Gen 2).
- Housing material.
- Acrylonitrile butadiene styrene (ABS).
- Product colour.
- Black.
- Product type.
- HDD/SSD duplicator.
- System requirements.
- Linux operating systems supported.
- Yes.
- Mac compatibility.
- Yes.
- Windows operating systems supported.
- Yes.
- Weight & dimensions.
- Dimensions (WxDxH). 43.9 x 108 x 24.1 mm.
- Packaging data.
- Quantity per pack. 1 pc(s)
Specifications
| Delivery Time | 3-5 working days |
|---|---|
| Delivery Cost | £4.99 |
Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more