Product Description
- Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard
- Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568.
- One fiber-optic, 1310nm wavelength, connector type and distance vary with model.
- FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm.
- FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm.
- Data Transfer Rate:.
- TP: 10/100Mbps.
- FX: 100Mbps.
- Duplex mode support:.
- Full or half-duplex mode by auto-negotiation (TP).
- Full or half-duplex mode by DIP switch (FX).
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL.
- DIP switch: 2 DIP switches.
- Rear DIP switch: FX duplex mode selection.
- Side DIP switch: LFP (Link Fault Pass-through) mode selection.
- IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets.
- PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter.
- It supports both half-duplex and full-duplex operations and a variety of fiber options.
- The converter auto-adapts to the highest level of performance supported by the device connected to the STP port.
- When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth.
- When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth.
- An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface.
- The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors.
- Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net..
- The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design.
- LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.
- The DIP switch provides the disabling or enabling of the LFP function.
- LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit.
- LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link.
- Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net..
- Network.
- Duplex system.
- Full, Half.
- Auto MDI/MDI-X.
- Yes.
- Ethernet LAN data rates. 10,100 Mbit/s.
- Ethernet interface type.
- Fast Ethernet.
- Networking standards.
- IEEE 802.3, IEEE 802.3u, IEEE 802.3x.
- Converter output interface. 100Base-FX.
- Converter input interface. 1000Base-TX.
- Maximum data transfer rate. 100 Mbit/s.
- Performance.
- Sensitivity. -31.8 dBmW.
- Tx power (max). -14 dBmW.
- Fiber cable diameters supported (core/cladding). 50/125,62.5/125 µm.
- Fiber mode structure.
- Multi-mode.
- Wavelength. 1310 nm.
- Maximum transfer distance. 2000 m.
- .
- Housing material.
- Metal.
- LED indicators.
- Yes.
- Product colour.
- Black.
- Internal.
- No.
- Ports & interfaces.
- DC-in jack.
- Yes.
- Fiber optic connector.
- ST.
- Fiber ports quantity. 1.
- Ethernet LAN (RJ-45) ports. 1.
- Connectivity technology.
- Wired.
- Power.
- Input current. 2 A.
- Input voltage. 5 V.
- Weight & dimensions.
- Weight. 200 g.
- Height. 26 mm.
- Depth. 70 mm.
- Width. 97 mm.
- Operational conditions.
- Storage relative humidity (H-H). 5 - 90%.
- Operating relative humidity (H-H). 5 - 90%.
- Storage temperature (T-T). -40 - 70 °C.
- Operating temperature (T-T). 0 - 50 °C.
- Certificates.
- Certification.
- FCC, CE. leaflet
Specifications
| Brand Id | 12828 |
|---|---|
| Delivery Time | 3-5 working days |
| Delivery Cost | £0.00 |
Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more