Product Description
- Standard.
- Complies with IEEE 802.3 10BASE-T.
- Complies with IEEE 802.3u 100BASE-TX/100BASE-FX.
- Complies with IEEE 802.3ab 1000BASE-T.
- Complies with IEEE 802.3z 1000BASE-SX/LX.
- IEEE 802.3x full-duplex flow-control, back-pressure in half-duplex eliminate packets loss.
- Interface.
- Dual 100BASE-FX/1000BASE-SX/LX SFP fiber-optic slots.
- One 10/100/1000BASE-T Copper, auto MDI/MDIX function.
- Auto-negotiation for 10/100/1000BASE-T; half-duplex or full-duplex for 10Mbps and 100Mbps, full-duplex for 1000Mbps.
- Supports maximum frame size up to 10K jumbo packet size.
- IEEE 802.1Q Tag VLAN transparent, multicast pass through.
- Redundancy.
- Link status auto-detecting and redundant on dual ports with the same connector type.
- Allows only the Primary-Port or the Backup-Port to activate at a time.
- When the Primary-Port link fails occurs, the traffic swaps to Backup-Port automatically.
- Once the Primary-Port link regains, the traffic swaps from the Backup-Port to the Primary-Port.
- Hardware fiber port redundant.
- Mechanical.
- External 5V/2.5A DC power supply.
- LED indicators for easy network diagnose.
- DIP switch for 100FX or 1000X SFP module supports on dual SFP slots.
- DIP switch for 3-port operation in Gigabit switch mode or redundant mode.
- Compact in size, easy installation.
- Co-works with PLANET 10”/19” Media Converter Chassis (MC-700/MC-1500/MC-1500R/MC-1500R48).
- Wall mounting and DIN-Rail installation supported.
- PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing dual SFP slots; accept 100FX or 1000X SFP module, and other
- shown below:.
- DIP Switch for 100FX or 1000X SFP module supports on dual SFP slots.
- DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode.
- Redundant Hardware Fiber Port.
- Highly Convenient and Distance Extendable.
- The GT-1205A is equipped with one 10/100/1000BASE-T port and dual SFP slots to support conversion between 10/100/1000BASE-T and 100/1000BASE-X network.
- The dual SFP slots make the Ethernet signals connect easily and efficiently by adding single-mode or multi-mode media modules or the combination of both types.
- The GT-1205A provides high reliability and flexibility to extend the media transmission distance up to 550m or 2km (multi-mode fiber) and 10km or longer 20/40/80/120 kilometers (single-mode fiber or WDM fiber), depending on the optional 100/1000BASE-SX/LX SFP modules..
- Adjustable DIP Switch for 100FX or 1000X SFP Module Selection.
- Via the built-in DIP switch on rear panel, the GT-1205A can be configured as supports 100BASE-FX SFP module or 1000BASE-X SFP module on its dual SFP slots, the GT-1205A can be connected over fiber optic cabling at a distance extended from 550 meters to 2km (multi-mode fiber) to 10/20/40/80/120 kilometers (single-mode fiber or WDM fiber), using the PLANET MFB/MGB series 100/1000BASE-X SFP modules..
- Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode.
- Via the built-in DIP switch, the GT-1205A can be configured as 3-port Ethernet switch or 2-port redundant media converter.
- In the 3-port switch mode, the GT-1205A can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 2-port redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications.
- The redundant mode also supports auto-recovering function.
- If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair..
- Easy Deployment Standalone or with Chassis.
- The GT-1205A Gigabit Media Converter can be used as a standalone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700 and MC-1500 chassis series.
- These media chassis can assist in providing DC power to the GT-1205A Gigabit Media Converter and the fiber-optic network can be maintained at one central location.
- With the 3-port switch mode, they work in high performance Store and Forward mechanism, and prevent packet loss with IEEE 802.3x Flow Control (Full-duplex) and Back Pressure (Half-duplex) function..
- Plug & Play Installation.
- As the GT-1205A Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/FX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy simply by using the plug and play feature..
- Network.
- Duplex system.
- Full, Half.
- Auto MDI/MDI-X.
- Yes.
- Ethernet LAN data rates. 10,100,1000 Mbit/s.
- Ethernet interface type.
- Gigabit Ethernet.
- Networking standards.
- IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z.
- Converter output interface. 1000Base-X.
- Converter input interface. 1000Base-T.
- Maximum data transfer rate. 1000 Mbit/s.
- Performance.
- Maximum transfer distance. 120000 m.
- .
- LED indicators.
- Yes.
- Product colour.
- Black.
- DIN rail mounting.
- Yes.
- Plug and Play.
- Yes.
- Internal.
- No.
- Ports & interfaces.
- Fiber optic connector.
- SFP.
- Fiber ports quantity. 2.
- Ethernet LAN (RJ-45) ports. 1.
- Connectivity technology.
- Wired.
- Power.
- Input current. 2 A.
- Input voltage. 5 V.
- Weight & dimensions.
- Weight. 180 g.
- Height. 26 mm.
- Depth. 70 mm.
- Width. 94 mm.
- Operational conditions.
- Storage relative humidity (H-H). 5 - 95%.
- Operating relative humidity (H-H). 5 - 95%.
- Storage temperature (T-T). -10 - 70 °C.
- Operating temperature (T-T). 0 - 50 °C.
- Certificates.
- Certification.
- FCC Class B, CE.
- Logistics data.
- Harmonized System (HS) code. 85176990
Specifications
| Brand Id | 12828 |
|---|---|
| Delivery Time | 3-5 working days |
| Delivery Cost | £0.00 |
Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more