Product Description
- Provides both internal and external USB 3.2 Gen 1 connections.
- Optional SATA power connector for up to 900mA per port output.
- Fully compliant with USB 3.2 Gen 1 revision 1.0
- and Intel xHCI rev0.96
- .
- UASP support for more efficient data transfer.
- PCI Express 2.0 Compliant.
- Supports USB transfer speeds of 5Gbps (Super Speed), 480Mbps (High Speed), 12Mbps (Full Speed), and 1.5Mbps (Low Speed).
- Backward compatible with previous USB standards.
- USB ports are Hot Swapping and Plug-and-Play compliant.
- Supports PCI Bus Power Management Interface Specification revision 1.2.
- Fully supports the following USB Communication Types: Control/Bulk/Interrupt/Isochronous Transfer.
- Add one internal and one external SuperSpeed USB 3.0 (USB 3.2 Gen 1) to your PC.
- The PEXUSB3S11 PCI Express USB 3.2 Gen 1 Card lets you add one internal, and one external USB 3.2 Gen 1 port to your PC through a PCI Express slot..
- Featuring a native NEC PCI Express host controller chipset, the new USB 3.2 Gen 1 standard supports transfer rates of up to 5Gbps, while still providing backward compatibility with older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices.
- The inclusion of an internal USB 3.2 Gen 1 connection provides the added benefit of compatibility with USB 3.2 Gen 1-based internal storage solutions or front-bay hubs..
- Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.2 Gen 1 controller performs up to 70% faster than conventional USB 3.2 Gen 1 when paired with a UASP supported enclosure
- Note: UASP requires a compatible operating system).
- Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers.
- See our UASP test results below for further details..
- For bus-powered USB devices, this PCIe USB 3.2 Gen 1 card includes an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port to USB 3.2 Gen 1 devices (500mA for USB 2.0)..
- Backed by a StarTech.com lifetime warranty and free lifetime technical support..
- Improved Performance with UASP.
- UASP is supported in Windows® 8 and Server 2012.
- In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.2 Gen 1 at peak performance..
- At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources..
- Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.2 Gen 1 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive..
- Ports & interfaces.
- Host interface.
- PCIe.
- Output interface.
- USB 3.2 Gen 1 (3.1 Gen 1).
- Design.
- Product colour.
- Red.
- Certification.
- CE, FCC.
- Operational conditions.
- Operating temperature (T-T). 0 - 50 °C.
- Storage temperature (T-T). -20 - 60 °C.
- Operating relative humidity (H-H). 0 - 85%.
- Weight & dimensions.
- Width. 76 mm.
- Depth. 121 mm.
- Height. 19 mm.
- Weight. 40 g.
- Packaging data.
- Package width. 143 mm.
- Package depth. 175 mm.
- Package height. 33 mm.
- Package weight. 135 g.
- Logistics data.
- Harmonized System (HS) code. 84733020.
- Products per master (outer) case. 60 pc(s).
- Master (outer) case width. 508 mm.
- Master (outer) case length. 385 mm.
- Master (outer) case height. 322 mm.
- Other
- .
- Data transfer rate. 5120 Mbit/s.
- Ports quantity. 2.
- Connectivity technology.
- Wired.
- Mac compatibility.
- No.
- Compatible operating systems.
- Microsoft Windows XP/Server 2003/Vista/7/Server 2008 R2.
- Quantity outer carton. 40 pc(s). manual pdf. leaflet
Specifications
| Brand Id | 15430 |
|---|---|
| Delivery Time | 3-5 working days |
| Delivery Cost | £4.99 |
Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more