Vision Vision HDMI | Maggioro
Vision HDMI-over-IP Transmitter AV transmitter Black

Vision

Vision HDMI-over-IP Transmitter AV transmitter Black

£98.99
Buy at Back to the Office

Sold by Back to the Office

Price verified today Secure checkout

Product Description

  • Distributes HDMI via a network.
  • H.265 compression.
  • One-to-One directly over a LAN or directly.
  • One-to-Many over LAN.
  • IR Pass-through.
  • USB 1.1 transmission.
  • The TC-HDMIIP/3 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network.
  • With no visible loss of video quality it is perfect for corporate and digital signage applications..
  • Beware of cheap alternatives that flood your network!.
  • USB Over Network.
  • It can support USB version 1.1 from the transmitter to all receivers.
  • Each receiver has two USB ports for adding flexibility.
  • This is for USB peripherals like keyboard, mice, but not applications that demand high bandwidth like interactive displays..
  • Scalable.
  • Transmitters and receivers sold separately so you can scale your system..
  • Advanced EDID Copy.
  • A reset button restores EDID to default, or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter..
  • One to Many.
  • Need to display one source on many screens? This product multi-casts, so you can have one transmitter for the source, and over 100 x receivers can sit on the network – one for each display.
  • Only one transmitter per network..
  • Point to Point without LAN.
  • Connect one transmitter directly to a receiver and completely bypass a network.
  • This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable..
  • Maximum Length.
  • When using a LAN the signal will be repeated by each node on the network, resulting in unlimited length..
  • HD.
  • Fully HDCP 1.4 compliant, it supports resolutions up to 1920 x 1200 @ 60 Hz..
  • Audio.
  • Digital audio which is encoded on the HDMI signal is transmitted..
  • IR Pass-Through.
  • Control the source device from the display with the IR pass-through.
  • An IR blaster and receiver cable is included, and it supports standard 20-60 kHz IR signals..
  • Plug and Play.
  • EDID (extended display identification data) is automatically passed through.
  • Just connect everything together and it will work immediately..
  • H.265 Compression.
  • Video is compressed using the H.265 protocol.
  • Images are full colour with smooth motion..
  • LAN Protocols.
  • Despite using the standard IP protocols you don’t need to be a network engineer.
  • All end points must be on the same subnet… that’s all you need to know.
  • For best results use a stand-alone network for this system..
  • Dual-Power.
  • This product requires a power supply for each transmitter and receiver.
  • It does not use PoE..
  • Unmanaged Switch.
  • Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled, but in this case no advanced switch setup is required.
  • A low cost unmanaged switch can be used..
  • Multiple Sources.
  • If you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies.
  • The systems are kept separate and cannot be used as a matrix.
  • A DHCP switch assigns IP addresses to each end point and is used to create the vLANs..
  • Auto Standby.
  • If the input is shut off the display will be allowed to go to sleep..
  • Not Backward Compatible.
  • This version uses a Sigmastar chipset and is not compatible with the previous v2 product which uses a HiSilicon chipset..
  • .
  • Product colour.
  • Black.
  • HDCP.
  • Yes.
  • HDCP version. 1.4.
  • Cable length. 1.5 m.
  • Colour depth. 12 bit.
  • Supported graphics resolutions. 1920 x 1200 (WUXGA).
  • Video compression formats.
  • H.265.
  • Bandwidth. 6.75 Gbit/s.
  • IR pass-through.
  • Yes.
  • Maximum refresh rate. 60 Hz.
  • Cable types supported.
  • Cat5e, Cat6.
  • Maximum resolution. 1920 x 1200 pixels.
  • Type.
  • AV transmitter.
  • Ports & interfaces.
  • USB connector type.
  • USB Type-A, USB Type-B.
  • RJ-45 input ports. 1.
  • Connectivity technology.
  • Wired.
  • Power.
  • AC input frequency. 50 / 60 Hz.
  • AC input voltage. 100 - 240 V.
  • Operational conditions.
  • Operating temperature (T-T). 10 - 50 °C.
  • Operating relative humidity (H-H). 20 - 90%.
  • Weight & dimensions.
  • Transmitter weight. 150 g.
  • Transmitter dimensions (WxDxH). 92 x 67 x 168 mm.
  • Weight. 150 g.
  • Height. 168 mm.
  • Depth. 67 mm.
  • Width. 92 mm.
  • Technical details.
  • Compliance certificates.
  • RoHS

Specifications

Brand Id 17446
Delivery Time 3-5 working days
Delivery Cost £0.00

Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more