Product Description
- A dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure.
- Supports balanced / unbalanced line level inputs and drives 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems.
- Built-in WebGUI-configurable DSP allows speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and system protection.
- Ground lift deployed to eliminate unwanted noises from power circuit.
- Class-D design with ENERGY STAR qualification for high power efficiency.
- Customizable Auto Standby mode
- Amplifier automatically switches to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes.
- Integrated protection circuit
- Protects the system from damages caused by Amp shortcut, Amp output over/under voltage, high frequency overload, and overtemperature.
- Amplifier will be muted when the heat sink temperature exceeds the limit.
- Fanless design
- Avoids fan noise and prevents dust from building up.
- Expansion slot for add-on expansion card
- Install AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals.
- Supports VK Control System via RS-232 and Ethernet connection.
- Supports rack or surface-mounting.
- Firmware upgradable.
- ATEN AP206 is a dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure.
- The support for balanced / unbalanced line level inputs and the capability of driving 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems have made AP206 suit a wide range of public address applications.
- Configurable through an intuitive WebGUI, the built-in DSP allows Speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection purposes.
- Ground lift is deployed to eliminate unwanted hum noises from power circuit.
- Immersive sound experience is delivered with no compromise on power efficiency thanks to the amplifier’s Class-D design and ENERGY STAR qualification, conserving energy while lowering operational costs.
- Customizable Auto Standby mode enables the AP206 to automatically switch to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes..
- Speaking of the system protection circuit, the AP206, along with the speakers connected to it, are prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature.
- Plus, the amplifier will be muted when the heat sink temperature exceeds the limit.
- The fanless design avoids fan noise and prevents dust from building up inside the chassis..
- Engineered to deliver the ultimate flexibility, the AP206
- an expansion slot for plugging in AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals.
- The amplifier can also be integrated with VK Control System via RS-232 and Ethernet connection for comprehensive control even from a distance.
- Mounting hardware is available for rack or surface-mounting depending on the installation needs.
- With a rich set of
- , the AP206 assures reliable amplification with professional audio quality and high power efficiency for any enterprise-grade applications that require high quality sound reinforcement and distribution..
- Audio.
- RMS rated power. 120 W.
- Frequency range. 50 - 20000 Hz.
- Output impedance. 600 Ω.
- Input impedance. 20000 Ω.
- Total Harmonic Distortion (THD). 0.1%.
- Amplifier class.
- D.
- Peak power per channel. 120 W.
- Ports & interfaces.
- Number of Euroblock input connectors. 2.
- RS-232 ports. 1.
- Number of Euroblock output connectors. 2.
- RS-232 connector type. 3-pin.
- Speakers connectivity type.
- Euroblock.
- Technical details.
- Country of origin.
- Taiwan.
- Material.
- Metal.
- Product colour.
- Black.
- Connectivity technology.
- Wired.
- Power.
- Power protection
- .
- Overload, Under voltage.
- Maximum current. 2 A.
- AC input frequency. 50/60 Hz.
- AC input voltage. 100 - 240 V.
- Power source type.
- AC.
- Weight & dimensions.
- Weight. 2.15 kg.
- Height. 44 mm.
- Depth. 200 mm.
- Width. 323 mm.
- Operational conditions.
- Operating relative humidity (H-H). 0 - 80%.
- Storage temperature (T-T). -20 - 60 °C.
- Operating temperature (T-T). 0 - 50 °C.
- Certificates.
- Certification.
- FCC, CE, UKCA.
- Packaging data.
- Package weight. 3.5 kg.
- Package height. 140 mm.
- Package depth. 462 mm.
- Package width. 322 mm.
- Logistics data.
- Master (outer) case gross weight. 3.5 kg.
- Master (outer) case height. 140 mm.
- Master (outer) case length. 462 mm.
- Master (outer) case width. 322 mm.
- Harmonized System (HS) code. 85184000.
- Quick Start Guide. leaflet. manual pdf
Specifications
| Brand Id | 1196 |
|---|---|
| Delivery Time | 3-5 working days |
| Delivery Cost | £0.00 |
Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more