Product Description
- Mid-tower PC case with dual-tone design and half-hinged tempered glass panel.
- Mesh front panel and dedicated solid steel PSU shroud.
- Support for ATX motherboards and GPUs up to 330mm long.
- Five pre-installed Kolink Umbra ARGB fans.
- Four storage drive bays.
- Available in three colourways.
- House your gaming PC in something bold with the Kolink Observatory MX Series PC Case.
- The dual-tone colouring, half-hinged glass side panel, and front mesh create a strong aesthetic for any gaming PC.
- Meanwhile, the five pre-installed Kolink Umbra ARGB fans provide ample airflow to keep your components at optimum temperature..
- The Kolink Observatory MX Mesh: Optimal Airflow.
- The Kolink Observatory MX Series
- two styles, each available in three colourways.
- You can choose between the Glass or Mesh editions, and then black, white, or black and white colourings..
- This is the Mesh model in black and white.
- The front panel has a mesh design, to ensure ample airflow.
- Keeping the aesthetic sleek, the dedicated PSU shroud is formed with solid steel panelling.
- As the black and white model, the exterior and interior are black, with the shroud offset in white.
- Thus, creating a bold effect..
- Generous Hardware Support.
- More than just its good looks, the Kolink Observatory MX Mesh has incredible support for a variety of hardware.
- This chassis can accommodate a Mini-ITX, Micro-ATX, or ATX motherboard, with seven expansion slots on the rear panel for PCIe devices.
- In the main chamber, there is 330mm clearance for GPUs..
- The dedicated PSU shroud can host power supplies up to 180mm.
- There is also a storage drive cage with four bays.
- Two can hold either 2.5" SSDs or 3.5" HDDs, whilst the other two are for 2.5" drives only..
- Airflow for Days.
- To keep your gaming PC at optimum temperature, the Kolink Observatory MX Mesh can support both air and water-cooling hardware.
- There are five Kolink Umbra ARGB fans pre-installed across the chassis, to bolster the air flowing through the mesh panelling.
- The front
- two 140mm fans.
- Upon the top, there are two 120mm models, and the rear holds a singular 120mm fan, too..
- Alternatively, there is support for radiators and additional fans throughout the chassis.
- The front panel can host a maximum of two 140mm fans or a radiator either 240mm, 280mm, or 360mm long.
- For the back panel, the 120mm fan mount can instead support a 120mm radiator.
- The top panel can only support the two 120mm fans, but there are also two 120mm brackets on the PSU shroud to provided dedicated cooling for the second chamber..
- Finally, the Kolink Observatory MX Mesh PC Case has clearance for CPU coolers up to 160mm tall..
- Additional
- .
- The Kolink Observatory MX Mesh
- a USB 3.0 and USB 2.0 port as part of the I/O panel, with an HD audio jack.
- There is also a reset button that can be used to control the fans.
- Alternatively, these can be connected via a 3-pin 5V header and controlled through the lead fan..
- Design.
- Maximum PSU length. 18 cm.
- Maximum graphics card length. 33 cm.
- Maximum CPU cooler height. 16 cm.
- On/off button.
- Yes.
- Cable management.
- Yes.
- Illumination colour.
- Multi.
- Illumination.
- Yes.
- Suitable for.
- Gaming.
- Side window.
- Yes.
- Number of expansion slots. 7.
- Number of 2.5" bays. 2.
- Number of 3.5" bays. 2.
- Supported motherboard form factors.
- ATX, micro ATX, Mini-ITX.
- Product colour.
- Black.
- Material.
- Steel, Tempered glass.
- Type.
- PC.
- Form factor.
- Midi Tower.
- Power supply.
- Supported power supply form factors.
- ATX.
- Number of power supply units. 1.
- Ports & interfaces.
- Audio output.
- Yes.
- Audio input.
- Yes.
- USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity. 2.
- USB 2.0 ports quantity. 1.
- Cooling.
- Front radiator sizes supported. 240,280,360 mm.
- Suitable location.
- Computer case.
- Top fans diameters supported. 120 mm.
- Number of top fans supported (max). 2.
- Top fans installed. 2x 120 mm.
- Rear fans diameters supported. 120 mm.
- Number of rear fans supported (max). 1.
- Rear fans installed. 1x 120 mm.
- Front fans diameters supported. 120,140 mm.
- Number of front fans supported (max). 2.
- Front fans installed. 2x 140 mm.
- Storage.
- SSD form factor. 2.5".
- Supported HDD sizes. 2.5,3.5".
- Weight & dimensions.
- Weight. 5.6 kg.
- Height. 440 mm.
- Depth. 350 mm.
- Width. 200 mm
Specifications
| Delivery Time | 3-5 working days |
|---|---|
| Delivery Cost | £4.99 |
Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more