Product Description
- Resilient 10Gbps and Layer 3 Routing Solution for Enterprise Networking PLANET SGS-6310 series is a brand-new Layer 3 Stackable Managed Gigabit Switch with 10Gbps uplink capability for various kinds of network applications and flexible deployment.
- The SGS-6310-16S8C4XR
- 24 100/1000BASE-X SFP ports and 8 10/100/1000BASE-T RJ45 copper ports. shared with Ports 1 to 8. and 4 1G/10GBASE-X SFP+ ports with 128Gbps switch fabric delivered in a 1U rugged case design.
- The SGS-6310 series provides high-density performance.
- Layer 3 IPv4/IPv6 static routing.
- RIP and OSPF dynamic routing capability.
- ERPS ring. abundant L2/L4 switching engine. and virtual switch stacking technology to fulfill the need of heavy transmission of all applications.
- It gives the enterprises. service providers and campuses flexible control over port density. uplinks and switch stack performance at an affordable price.
- High Performance 10Gbps Ethernet CapacityThe four SFP+ ports built in the SGS-6310 series boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as up to 80Gbps. which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
- Each of the SFP+ ports supports Dual-Speed. 10GBASE-SR/LR or 1000BASE-SX/LX. meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.
- Centralized Hardware Stacking ManagementTwo of the 10G SFP+ ports can be configured to connect several SGS-6310 series for building a virtually logical facility.
- The stackable SGS-6310 series. suitable for enterprises. service providers and telecoms. provides high port density. large uplink bandwidth and high switch stack performance. thus giving great flexibility for different application requirements.
- The SGS-6310 series can connect as a ring for redundancy and ensures that data integrity is retained even if one switch in the stack fails.
- You can even hot-swap switches without disrupting the network. which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
- Redundant Ring.
- Fast Recovery for Critical Network ApplicationsThe SGS-6310 series supports redundant ring technology and
- strong. rapid self-recovery capability to prevent interruptions and external intrusions.
- It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in harsh environments.
- In a certain simple ring network. the recovery time could be less than 10ms to quickly bring the network back to normal operation.
- Layer 3 Routing SupportThe SGS-6310 series enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually. the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically.
- The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination.
- The OSPF is an interior dynamic routing protocol for autonomous system based on link state.
- The protocol creates a database for link state by exchanging link states among Layer 3 switches. and then uses the Shortest Path First algorithm to generate a route table based on that database.
- Strong MulticastThe SGS-6310 series supports abundant multicast
- .
- In Layer 2. it
- IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1 snooping.
- With Multicast VLAN Register (MVR). multicast receiver/sender control and illegal multicast source detect functions which make the SGS-6310 series great for any robust networking.
- Full IPv6 Support The SGS-6310 series supports IPv4-to-IPv6 technologies including IPv4 manual/automatic tunnel.
- IPv6-to-IPv4 tunnel. and Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnel.
- It comprehensively supports IPv6 Neighbor Discovery.
- DHCPv6.
- Path MTU Discovery.
- IPv6-based Telnet.
- SSH and ACL. meeting the need of IPv6 network device management and service control.
- Robust Layer 2
- The SGS-6310 series can be programmed for basic switch management functions such as port speed configuration. port aggregation.
- VLAN.
- Multiple Spanning Tree Protocol. bandwidth control and IGMP snooping.
- This switch provides 802.1Q tagged VLAN.
- Q-in-Q. voice VLAN and GVRP Protocol functions.
- By supporting port link aggregation. the SGS-6310 series allows the operation of a high-speed trunk combined with multiple ports.
- It enables up to 64 groups for trunking with a maximum of 8 ports for each group.
- Excellent Layer 2 to Layer 4 Traffic ControlThe SGS-6310 series is loaded with powerful traffic management and WRR
- to enhance services offered by enterprises.
- The WRR functionalities include wire-speed Layer 4 traffic classifi
Specifications
| Brand Id | 12828 |
|---|---|
| Specifications | PLANET Layer 3 16-Port 100/1000X SFP Managed L3 10G Ethernet (100/1000/10000) 1U Blue |
| Language | en |
| Delivery Time | Standard delivery in 3 working days |
| Delivery Cost | £0.00 |
| Warranty | 1 year |
| Keywords | PLANET Layer 3 16-Port 100/1000X SFP Managed L3 10G Ethernet (100/1000/10000) 1U Blue |
Affiliate Disclosure: We may earn a commission when you purchase through our links, at no extra cost to you. This helps support our independent reviews. Learn more